Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

SENSe Subsystem
ESIB
SENSe:AVERage Subsystem
The SENSe:AVERage subsystem calculates the average of the data acquired. A new test result is
obtained from various successive measurements. The amount of test points and the axis reference of
the new result correspond to those of the original measurements.
[SENSe]
:AVERage
:COUNt
:AUTO
[:STATe]
:TYPE
COMMAND PARAMETERS UNIT COMMENT
MAXimum | SCALar
--
--
--
--
:[SENSe:]AVERage:COUNt 0 to 32767
The command specifies the number of measurements which are combined.
Example: ":AVER:COUN 16"
Features: *RST value: 0
SCPI: conforming
Modes:
R, A. VA-D
:[SENSe:]AVERage:COUNt:AUTO ON | OFF
AUTO ON selects a suitable number of :COUNt for the respective type of measurement.
Example: ":AVER:COUN:AUTO ON"
Features: *RST value: OFF
SCPI: conforming
Modes:
R, A. VA-D
:[SENSe:]AVERage[:STATe] ON | OFF
The command switches on or off the average function.
Example: "AVER OFF"
Features: *RST value: OFF
SCPI: conforming
Modes:
R, A, VA
1088.7531.12 6.104 E-15