Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

Delta Markers - Receiver
ESIB
MARKER DELTA- REFERENCE POINT submenu:
REFERENCE
POINT
REFERENCE
POINT
REF POINT
LEVEL
REF POINT
LVL OFFSET
REF POINT
FREQUENCY
The REFERENCE POINT softkey opens a sub-menu in which
the reference value of the REFERENCE FIXED function can
be modified.
The position of the reference point is indicated by two
additional display lines (horizontal and vertical). In addition, an
offset level may be defined which is added to each difference
during output.
The softkey is only available when the REFERENCE FIXED
function is switched on.
REF POINT
LEVEL
The REF POINT LEVEL softkey activates an entry box for setting the
reference level relevant to the REFERENCE FIXED function.
IEC/IEEE bus command
:CALCulate:DELT:FUNC:FIXed:RPOint:Y -10DBM
REF POINT
LVL OFFSET
The REF POINT LVL OFFSET softkey activates the entry box for the entry of
an additional offset level during output when the REFERENCE FIXED
function are enabled.
The offset level is set to 0 dB when the REFERENCE FIXED function are
switched on
IEC/IEEE bus command
:CALCulate:DELT:FUNC:FIX:RPO:Y:OFFSet 10DB
REF POINT
FREQUENCY
The REF POINT FREQUENCY softkey activates the entry box for the input of
a reference frequency for the REFERENCE FIXED function.
IEC/IEEE bus command
:CALCulate:DELT:FUNC:FIXed:RPOint:X 10.7MHZ
1088.7531.12 4.126 E-15