Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

ESIB
Documentation of Measurement Results
Printing Configuration – SETTINGS Key
HARDCOPY SETTINGS menu:
HARDCOPY
START
SETTINGS
COPY
SEL ITEMS
SELECT
ITEMS
HARDCOPY
SETTINGS
COPY
SCREEN
COPY
TRACE
COPY
TABLE
SELECT
QUADRANT
ENTER
TEXT
HARDCOPY
DEVICE
COLOR
ON OFF
TRC COLOR
AUTO INC
The SETTINGS key opens the menu to configure the printout.
The recommended procedure for configuring the printout is as
follows:
• Configure the desired printer and select the interface over
which the output is to take place by using Windows NT and
the HARDCOPY DEVICE softkey.
• Select the display items to be printed with the COPY
SCREEN, COPY TRACE softkeys.
• Select between coloured and b/w printouts with the COLOR
ON/ OFF and TRC COLOR AUTO INC softkeys.
• Enter comment applicable to the diagram or add a title for the
overall printout by using the ENTER TEXT softkey.
• Select the page format (QUADRANT, FULL PAGE) through
use of the SELECT QUADRANT softkey.
The COPY SCREEN, COPY TRACE and COPY TABLE
softkeys are selection switches, i.e., only one function can be
enabled at any one time. The push buttons are used for
selection only and do not initiate a print job. The actual printing is
initiated by the HARDCOPY START key.
1088.7531.12 4.51 E-15