Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

ESIB
MMEMory Subsystem
MMEMory:STORe:FINal
This command stores the final measurement data in an ASCII file.
Parameter: := DOS file name
Example: "MMEM:STOR:FIN ’A:\TEST.ASC’"
Features: *RST value: -
SCPI: device-specific
Mode:
R
The file name includes indication of the path and may also include the drive. The path name
corresponds to the DOS conventions. This command is an event which is why it is not assigned an
*RST value and has no query.
:MMEMory:CLEar:ALL
This command deletes all instrument settings in the current directory.
Example: ":MMEM:CLE:ALL"
Features: *RST value: -
SCPI: device-specific
Modes:
R, A, VA
This command is an "event" which is why it is not assigned an *RST value and has no query.
:MMEMory:SELect[:ITEM]:GSETup ON | OFF
This command includes the data of the general setup in the list of data subsets of a device setting to
be stored/loaded.
Example: ":MMEM:SEL:GSET ON"
Features: *RST value: OFF
SCPI: device-specific
Modes:
R, A, VA
:MMEMory:SELect[:ITEM]:HWSettings ON | OFF
This command includes the hardware settings in the list of data subsets of a device setting to be
stored/loaded.
Example: ":MMEM:SEL:HWS ON"
Features: *RST value: ON
SCPI: device-specific
Modes:
R, A, VA
Level and frequency lines are stored with this command as well.
1088.7531.12 6.95 E-15