Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

ESIB
Receiver - Data Reduction and Peak List
CONFIGURATION MODE - EMI RECEIVER menu (right side menu)
EMI
RECEIVER
PEAK
SEARCH
EDIT PEAK
LIST
NO OF
PEAKS
The PEAK SEARCH softkey starts the determination of the subrange
maxima list from the available scan results. The procedure can be repeated
as often as desired to try out different settings of margin and number of
subranges.
IEC/IEEE-bus command
:CALCulate:PEAKsearch[:IMMediate]
PEAKS
SUBRANGES
MARGIN
FINAL
MEAS TIME
LISN
AUTOMATIC
FINAL
INTER
ACTIVE
RUN
FINAL MEAS
The following table shows the peak list which is determined by the peak-search function after the
prescan:
¦
EDIT PEAK LIST (Prescan Results)
Trace1: 014QP Trace2: 014AV
Trace3: --- Trace4: ---
TRACE FREQUENCY LEVEL dBpT DELTA LIMIT dB
2 Average 80.0000 MHz 35.34 -3.91
2 Average 89.4800 MHz 38.83 -0.91
1 Max Peak 98.5200 MHz 47.53 -2.63
2 Average 98.5200 MHz 46.63 6.47
1 Max Peak 100.7200 MHz 54.14 3.88
2 Average 102.3200 MHz 50.89 10.56
1 Max Peak 113.2400 MHz 49.68 -1.08
2 Average 116.9200 MHz 44.81 3.91
1 Max Peak 125.8800 MHz 55.01 3.78
2 Average 125.8800 MHz 53.55 12.33
1 Max Peak 138.4800 MHz 45.68 -5.95
2 Average 138.4800 MHz 42.17 0.53
2 Average 144.0400 MHz 43.72 1.90
2 Average 167.0400 MHz 44.77 2.32
2 Average 176.2400 MHz 45.52 2.83
1 Max Peak 200.4800 MHz 52.49 -0.75
2 Average 200.4800 MHz 48.76 5.51
1 Max Peak 210.2800 MHz 60.55 7.09
2 Average 226.5600 MHz 59.02 15.24
2 Average 230.0000 MHz 48.59 4.75
1088.7531.12 4.99 E-15