Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

Display and Limit Lines - Analyzer
ESIB
LINES LIMIT-EDIT LIMIT LINE menu
EDIT LIMIT
LINE
NEW LIMIT
LINE
The EDIT LIMIT LINE and NEW LIMIT LINE softkeys both call the EDIT
LIMIT LINE submenu used for editing limit lines. In the table heading,
the characteristics of the limit line can be entered. The frequency/time
and level points are entered in the columns.
Name
Domain
Unit
X-Axis
X-Scaling
Y-Scaling
Limit
Comment
Time/Frequency
Limit/dBm
Enter name.
Select domain.
Select units.
Select interpolation
Entry of absolute or relative values for the X-axis
Entry of absolute or relative values for the Y-axis
Select upper/lower limit.
Enter comments.
Enter time/frequency points.
Enter level points.
EDIT LIMIT LINE TABLE
Name:
Limit_22
Domain:
FREQUENCY
Unit:
dBuV/m
X-Axis:
LOG
X-Scaling: ABSOLUTE
Y-Scaling: ABSOLUTE
Limit:
UPPER
Comment: Limit 22
FREQUENCY
30.000 MHz
230.000 MHz
230.000 MHz
1.000 GHz
30.0000
30.0000
37.0000
37.0000
LIMIT/dBuV/m
26
EDIT
LIMIT LINE
NAME
VALUES
INSERT
VALUE
DELETE
VALUE
SHIFT X
LIMIT LINE
SHIFT Y
LIMIT LINE
USER
SAVE
LIMIT LINE
PAGE UP
Press 25 ENTER to edit field.
49
50
PAGE DOWN
1088.7531.12 4.222 E-15