Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

CALCulate Subsystem
ESIB
:CALCulate:DELTamarker:FUNCtion:FIXed[:STATe] ON | OFF
This command switches the relative measurement to a fixed reference value on or off.
Example: ":CALC:DELT:FUNC:FIX ON"
Features: *RST value: OFF
SCPI: device-specific.
Modes:
R, A, VA-D
The reference value is independent of the current trace.
:CALCulate:DELTamarker:FUNCtion:FIXed:RPOint:Y
This command defines a new fixed reference value for the relative measurement.
Example: ":CALC:DELT:FUNC:FIX:RPO:Y -10dBm"
Features: *RST value: - (FUNction:FIXed[:STATe] is set to OFF)
SCPI: device-specific
Modes:
A, VA
The reference value is independent of the current trace.
:CALCulate:DELTamarker:FUNCtion:FIXed:RPOint:Y:OFFSet
This command defines an additional level offset for the relative measurement.
Example: ":CALC:DELT:FUNC:FIX:RPO:Y:OFFS 10dB"
Features: *RST value: 0 dB
SCPI: device-specific
Modes:
A, VA
The level offset is included in the output of the level value.
:CALCulate:DELTamarker:FUNCtion:FIXed:RPOint:X
This command defines the new fixed reference frequency, time or symbols for the relative
measurement.
Example: ":CALC:DELT:FUNC:FIX:RPO:X 10.7MHz"
Features: *RST value: - (FUNction:FIXed[:STATe] is set to OFF)
SCPI: device-specific
Mode:
A
The reference value is independent of the current trace. With span = 0, the reference time, otherwise
the reference frequency is defined.
1088.7531.12 6.12 E-15