Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

ESIB
SYSTem Subsystem
:SYSTem:DISPlay:UPDate ON | OFF
This command switches on or off the update of all display elements.
Example: " SYST:DISP:UPD ON
Features: *RST value: OFF
SCPI: device specific
Modes:
R, A, VA
:SYSTem:ERRor?
This command queries the earliest entry to the error queue, thus deleting it. .
Example: ":SYST:ERR?"
Features: *RST value: –
SCPI: conforming
Modes:
R, A, VA
Positive error numbers indicate device-specific errors, negative error numbers are error messages
defined by SCPI (cf. Chapter 9). If the error queue is empty, the error number 0, "no error", is
returned. This command is identical with the command :STATus:QUEue:NEXT?. This command is
a query which is why it is not assigned an *RST value.
:SYSTem:PASSword[:CENable]
This command enables access to the service functions by means of the password.
Example: ":SYST:PASS ’XXXX’"
Features: *RST value: –
SCPI: conforming
Modes:
R, A, VA
This command is an event which is why it is not assigned an *RST value and has no query.
:SYSTem:PRESet
This command triggers an instrument reset.
Example: ":SYST:PRES"
Features: *RST value: –
SCPI: conforming
Modes:
R, A, VA
The effect of this command corresponds to that of the PRESET key with manual control or to the
*RST command.
:SYSTem:PRESet:COMPatible FSE | OFF
This command determines whether the unit is FSE-compatible after a preset. Following a preset, an
ESIB is not in the same mode as an FSE. With compatibility, ESIB has the same default settings as
FSE after a preset.
Example: ":SYST:PRES:COMP FSE"
Features: *RST value: OFF
SCPI: device-specific
Mode:
R, A, VA
1088.7531.12 6.171 E-15