Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

MMEMory Subsystem
ESIB
:MMEMory:STORe:STATe 1,
This command stores the current instrument setting in a file.
Parameter: ::= DOS file name without extension
Example: ":MMEM:STOR:STAT 1,’TEST’"
Features: *RST value: -
SCPI: conforming
Modes:
R, A, VA
The current instrument state is stored as a file. The file name includes indication of the path and may
also include the drive. The path name corresponds to the DOS conventions. This command is an
event which is why it is not assigned an *RST value and has no query.
:MMEMory:STORe:TRACe 1 to 4,
This command stores the selected trace (1 to 4) in ASCII format in a file.
Parameter: 1 to 4 := selected trace 1 to 4
:= DOS file name
Example: ":MMEM:STOR:TRAC 3,’A:\TEST.ASC’"
Features: *RST value: -
SCPI: device-specific
Modes:
R, A, VA
The file name includes indication of the path and may also include the drive. The file name and path
information correspond to the DOS conventions.This command is an event which is why it is not
assigned an *RST value and has no query.
:MMEMory:CLEar:STATe 1,
This command deletes the instrument setting denoted by .
Parameter: ::= DOS file name without extension
Example: ":MMEM:CLE:STAT 1,’TEST’"
Features: *RST value: -
SCPI: device-specific
Modes:
R, A, VA
The device data set specified is deleted. The file name includes indication of the path and may also
include the drive. The path name corresponds to the DOS conventions. This command is an event
which is why it is not assigned an *RST value and has no query.
1088.7531.12 6.94 E-15