Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

ESIB- Receiver
ESIB
PRESCAN
PHASES
The PRESCAN PHASES and FINAL PHASES softkeys open the
submenu for the selection of phase and protective earth setting.
FINAL
PHASES
PRESCAN PHASES:
FINAL PHASES:
Softkeys ESH2-Z5/ENV 4200, ESH3-Z5
and OFF or PHASE N, PHASE L1,
PHASE L2 and PHASE L3 as well as PE
GROUNDED and PE FLOATING are
toggle keys. Only one of them can be
activated at a time.
All combinations of phases and PE
setting are possible.
PHASE N
PHASE L1
PHASE L2
Softkeys PHASE N, PHASE L1, PHASE L2
and PHASE L3 select the phase of the V-
network on which the RFI voltage is to be
measured.
PHASE N
PHASE L1
PHASE L2
RFI on phase N is measured,
RFI on phase L1 is measured,
RFI on phase L2 is measured
(only for ESH2-Z5/ENV 4200),
PHASE L3 RFI on phase L3 is measured
(only for ESH2-Z5/ENV 4200).
IEC/IEEE-bus command
:INPut:LISN:PHASe L1| L2| L3| N
PHASE L3
PE
GROUNDED
PE
FLOATING
Softkeys PE GROUNDED and PE
FLOATING switch the protective earth
conductor chokes on or off.
PE GROUNDED
PE FLOATING
protective earth conductor
choke switched
off,
protective earth conductor
choke switched
on.
IEC/IEEE-bus command
:INPut:LISN:PEARth
GROunded|FLOating
1088.7531.12 4.110 E-15