Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

ESIB
CALCulate Subsystem
:CALCulate:MARKer:FUNCtion:ADEMod:AFRequency[:RESult]?
This command queries the audio frequency of the analog demodulation.
Example: ":CALC:MARK:FUNC:ADEM:AFR? "
Features: *RST value: -
SCPI: device-specific
Mode:
VA-A
:CALCulate:MARKer:FUNCtion:ADEMod:FERRor[:RESult]?
This command queries the frequency error of the analog demodulation.
Example: ":CALC:MARK:FUNC:ADEM:FERR? "
Features: *RST value: -
SCPI: device-specific
Mode:
VA-A
This command is only a query which is why it is not assigned an *RST value.
:CALCulate:MARKer:FUNCtion:ADEMod:CARRier[:RESult]?
This command queries the results of the carrier frequency measurement.
Example: ":CALC:MARK:FUNC:ADEM:CARR?"
Features: *RST value: -
SCPI: device-specific
Mode:
VA-A
This command is only a query which is why it is not assigned an *RST value.
:CALCulate:MARKer:FUNCtion:ADEMod:SINad[:STATe] ON | OFF
This command switches the SINAD measurement on or off.
Example: ":CALC:MARK:FUNC:ADEM:SIN ON"
Features: *RST value: OFF
SCPI: device-specific
Mode:
VA-A
This command is valid only in the analog demodulation mode with Real Time ON.
:CALCulate:MARKer:FUNCtion:ADEMod:SINad:RESult?
This command queries the results of the SINAD measurement.
Example: ":CALC:MARK:FUNC:ADEM:SIN:RES?"
Features: *RST value: -
SCPI: device-specific
Mode:
VA-A
This command is only a query and thus has no *RST value assigned.
1088.7531.12 6.43 E-15