Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

ESIB
Documentation of Measurement Results
Selection of Hardcopy Format
HARDCOPY SETTINGS-SELECT QUADRANT submenu:
SELECT
QUADRANT
SELECT
QUADRANT
UPPER
LEFT
LOWER
LEFT
UPPER
RIGHT
LOWER
RIGHT
The SELECT QUADRANT softkey calls the the submenu for
selection of QUADRANTthe location of the display screen
graphics on the printed page.
FULL
PAGE
FULL
PAGE
The FULL PAGE softkey switches quadrant printing off, i.e., printing now
takes place at full size. The information as to which quadrant was last
selected is also lost. FULL PAGE is the default setting.
IEC/IEEE-bus command :HCOPy:PAGE:DIMensions:FULL
UPPER
LEFT
LOWER
LEFT
UPPER
RIGHT
The UPPER LEFT, LOWER LEFT as well as UPPER RIGHT, LOWER
RIGHT softkeys select the page quadrants where the printed data will be
positioned. In this case, the actual size of the data printed on the page is
reduced to 25% of normal size. This reduction is independent of how the
graphics are distributed on the display screen. Thus, for two measurement
windows (SPLIT SCREEN), both measurement diagrams shown on the
display are placed in the chosen quadrant. Thus, up to a maximum of 8
measurement windows can be printed on one page. (4 print commands for a
SPLIT SCREEN display, each to a different quadrant)
IEC/IEEE-bus command
:HCOPy:PAGE:DIMensions:QUADrant 1|2|3|4
LOWER
RIGHT
1088.7531.12 4.53 E-15