Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

ESIB
CALCulate Subsystem
:CALCulate:TLINe 0 to 1000s
This command defines the position of the time lines.
Example: ":CALC:TLIN 10ms"
Features: *RST value: - (STATe to OFF)
SCPI: device-specific
Modes:
A-Z, VA
The time lines mark the given times in the display. Time lines are only valid for a SPAN = 0.
:CALCulate:TLINe:STATe ON | OFF
This command switches the time line on or off.
Example: ":CALC:TLIN2:STAT ON"
Features: *RST value: OFF
SCPI: device-specific
Modes:
A-Z, VA
1088.7531.12 6.17 E-15