Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

DISPlay Subsystem
ESIB
DISPlay
[:WINDow]
:TRACe
:MODE
COMMAND PARAMETERS UNIT COMMENT
:CWRite
:ANALog
:HCONtinuous
[:STATe]
:SYMBol
:EYE
:COUNt
:BARGraph
:LEVel
:LOWer?
:UPPer?
:PSAVe
[:STATe]
HOLDoff
WRITe | VIEW | AVERage |
MAXHold | MINHold | FRESult
DOTS | BARS | OFF
--
--
--
--
--
--
--
SYM
Vector Signal Analysis
Vector Signal Analysis
Vector Signal Analysis
:DISPlay:FORMat SINGle | SPLit
This command switches the test result display between FULL SCREEN and SPLIT SCREEN.
Example: ":DISP:FORM SPL"
Features: *RST value: SINGle
SCPI: device-specific
Modes:
R, A, VA
:DISPlay:PROGram[:MODE] ON | OFF
This command switches the display between the measuring instrument and the computer function.
Example: ":DISP:PROG ON"
Features: *RST value: OFF
SCPI: device-specific
Modes:
R, A, VA
:DISPlay:ANNotation:FREQuency ON | OFF
This command switches the x-axis annotation on or off.
Example: ":DISP:ANN:FREQ OFF"
Features: *RST value: ON
SCPI: conforming
Modes:
R, A, VA
1088.7531.12 6.64 E-15