Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

ESIB
Configuration/Setup
Firmware Update
New firmware versions can be installed from the integral disk drive. The firmware update kit contains
several disks.
The installation program is called in the SETUP menu.
CONFIGURATION SETUP sidemenu:
FIRMWARE
UPDATE
FIRMWARE
UPDATE
UPDATE
The FIRMWARE UPDATE softkey opens the submenu for
the installion of a new firmware version.
RESTORE
UPDATE
The UPDATE softkey starts the installation program and guides the user
through the remaining steps of the update procedure.
RESTORE
The RESTORE softkey restores the previous firmware version
Compatibility to FSE Instrument Family
CONFIGURATION SETUP sidemenu:
FSE MODE
ON OFF
The FSE MODE ON/OFF softkey determines whether theESIB is FSEcompatible
after a preset. Following a preset, the ESIB has not the same
settings as an FSE. With compatibility, the ESIB has the same default
settings as FSE after a preset.
IEC/IEEE-bus command :SYSTem:PRESet:COMPatible OFF | FSE
1088.7531.12 4.47 E-15