Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

Macros
ESIB
DEFINE
PAUSE
The DEFINE PAUSE softkey inserts a pause instruction into the macro
sequence which is being recorded. A running macro will pause when it
reaches this instruction, at which point settings on the unit under test could for
example be made. CONTINUE in the message window is used to continue
the macro execution.
IEC/IEEE-bus command --
DELETE
MACRO
The DELETE MACRO softkey deletes the macro which was previously
selected by the SELECT MACRO softkey. The softkey of the deleted title now
carries its default label (MACRO X, X = macro number)
IEC/IEEE-bus command --
MACRO
TITLE
The MACRO TITLE softkey activates the entry of the title for the selected
macro.
Because the macro title is used for labelling the corresponding softkey, a
maximum of only 20 characters is allowed. All text after the 10 th character is
written to the second line. However, entering the character @ forces a new
line at any point in the softkey title.
IEC/IEEE-bus command --
SELECT
MACRO
The SELECT MACRO softkey open the selection box with a list of all 7
macros. All softkey functions of this menu are related to this macro.
Macro 1
(Macro 2)
(Macro 3)
(Macro 4)
(Macro 5)
(Macro 6)
(Macro 7)
SELECT MACRO
IEC/IEEE-bus command --
1088.7531.12 4.74 E-15