Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

DISPlay Subsystem
ESIB
:DISPlay[:WINDow]:TRACe:Y[:SCALe]:RPOSition 0 to 100PCT
This command defines the position of the reference value.
Example: ":DISP:TRAC:Y:RPOS 50PCT"
Features: *RST value: 100PCT (tracking generator)
50PCT (vector analyzer)
SCPI: conforming
Modes:
A, VA
The numeric suffix in TRACe is not significant. This command is only valid in conjunction
with option Tracking Generator or in vector analyzer mode.
:DISPlay[:WINDow]:TRACe:Y[:SCALe]:PDIVision
This command defines the scaling of the Y-axis in the current unit.
Example: ":DISP:TRAC:Y:PDIV +1.20"
Features: *RST value: -
SCPI: conforming
Mode:
VA
The numeric suffix in TRACe is not significant.
:DISPlay[:WINDow]:TRACe:Y[:SCALe]:BOTTom
This command defines the minimum grid level for the display in the receiver mode.
Example: ":DISP:TRAC:Y:BOTT -20"
Features: *RST value: 0
SCPI: conforming
Mode:
R
The numeric suffix in TRACe is not significant.
:DISPlay[:WINDow]:TRACe:Y[:SCALe]:TOP
This command defines the maximum grid level for the display in the receiver mode.
Example: ":DISP:TRAC:Y:TOP 120"
Features: *RST value: 100
SCPI: conforming
Mode:
R
The numeric suffix in TRACe is not significant.
:DISPlay[:WINDow]:TRACe:Y:SPACing LINear | LOGarithmic | PERCent
This command toggles between linear and logarithmic display.
Example: ":DISP:TRAC:Y:SPAC LIN"
Features: *RST value: LOGarithmic
SCPI: conforming
Mode:
A
The linear display can be LIN/% (PERCent) or LIN/dB (LINear). The numeric suffix in TRACe
is not significant.
1088.7531.12 6.70 E-15