Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

Main Markers - Analyzer
ESIB
MARKER NORMAL-MARKER DEMOD submenu:
MARKER
DEMOD
MARKER
DEMOD
MKR DEMOD
ON OFF
AM
The MARKER DEMOD softkey calls a sub-menu in which the
type of demodulation desired, the duration of the
demodulation may be selected
FM
MKR
STOP TIME
.
.
.
MKR DEMOD
ON OFF
MKR
STOP TIME
AM
FM
The MKR DEMOD ON/OFF softkey switches the demodulation on/off. When
the demodulation is on, the sweep is stopped at all marker frequencies,
assuming the signal is over the threshold, and the signal is demodulated until
the entered sweep stop time elapses. A total of four stopping points (four
markers) can be programmed.
If no marker is set when the demodulation is switched on, the ESIB switches the
first marker on (MARKER 1) and positions it on the trace peak.
IEC-Bus-Befehl
:CALCulate:MARKer:FUNCtion:DEM ON|OFF
The MKR STOP TIME softkey activates the entry window for setting the stop
time.
The ESIB stops the sweep at the marker or the marker for the duration of the
defined stop time and then switches the demodulation on (see also MKR
DEMOD ON/OFF).
IEC-Bus-Befehl
:CALCulate:MARKer:FUNCtion:DEM:HOLDoff 3s
The AM and FM are selection switches of which only one can be activated at
any one time. They are used to set the desired demodulation type, FM or AM.
The default setting is AM.
IEC-Bus-Befehl
:CALCulate:MARKer:FUNCtion:DEM:SELect AM|FM
1088.7531.12 4.180 E-15