Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

Connecting a Mouse
ESIB
Connecting an External Keyboard
Caution:
The mouse may only be connected when the instrument is switched off
(STANDBY). Otherwise, correct operation of the mouse and instrument cannot be
guaranteed.
The instrument is fitted with a rear-panel 5-contact DIN connector (KEYBOARD) for the connection of
an external PC keyboard.
KEYBOARD x
During measurements, the keyboard makes it easier to enter comments, filenames, etc. For computer
function, the keyboard has the usual functions.
Chapter 3, in section "External Keyboard Control", contains a list which describes the assignment of the
instrument front-panel key functions to the key codes of the external keyboard as well as special key
combinations used for quick operations. Chapter 8 describes the interface for the connector.
After connection of the keyboard and subsequent power-on, the keyboard will be automatically
recognized. The default setting is for the US keyboard. Special settings such as repetitional rate etc. can
be performed in Windows NT menu START - SETTINGS - CONTROL PANEL - KEYBOARD.
1088.7531.12 1.24 E-3