Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

ESIB
Macros
Defining Macros
In the DEFINE MACRO menu, all necessary softkeys needed for macro management are available.
Included are functions for starting and ending macro programming, editing of a macro title, etc.
USER DEFINE MACRO menu
DEFINE
MACRO
ON
DEFINE
MACRO
RECORD
OFF
DEFINE
PAUSE
The DEFINE MACRO softkey calls the sub-menu to define
the macros.
The SELECT MACRO softkey is active and opens the box to
select the macro to be edited. In case no selection is made,
MACRO 1 is automatically selected.
IEC/IEEE-bus command --
DELETE
MACRO
MACRO
TITLE
SELECT
MACRO
RECORD
ON OFF
The RECORD ON/OFF starts or stops the recording of the macro.
ON
All key actions are recorded until the softkey is changed to OFF . To
indicate that macro record is enabled, the enhancement label
MAC is displayed.
The number of actions which can be stored in a macro is limited. If
the limit is exceeded, the error message "Macro too long.
Recording aborted" is output and the recording operation is aborted,
however, the actions already recorded do remain stored.
OFF The recording is stopped. The key actions are stored under the
macro chosen by the SELECT MACRO softkey.
IEC/IEEE-bus command --
1088.7531.12 4.73 E-15