Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

Configuration/Setup
ESIB
PHASE N
PHASE L1
PHASE L2
Softkeys PHASE N, PHASE L1, PHASE L2 and PHASE L3 select the phase
of the V-network on which the RFI voltage is to be measured.
PHASE N
PHASE L1
PHASE L2
RFI on phase N is measured,
RFI on phase L1 is measured,
RFI on phase L2 is measured
(only for ESH2-Z5/ENV 4200),
PHASE L3 RFI on phase L3 is measured
(only for ESH2-Z5/ENV 4200).
IEC/IEEE-bus command INPut:LISN:PHASe L1 | L2 | L3 | N
PHASE L3
PE
GROUNDED
PE
FLOATING
Softkeys PE GROUNDED and PE FLOATING switch the protective earth
conductor chokes on or off.
PE GROUNDED
protective earth conductor choke switched off,
PE FLOATING protective earth conductor choke switched.
IEC/IEEE-bus command INPut:LISN:PEARth GROunded | FLOating
1088.7531.12 4.36 E-15