Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

ESIB
Analyzer - Traces
Trace Export
TRACE 1 menu:
ASCII
EXPORT
The ASCII EXPORT softkey stores the active trace in a file with ASCII format.
Upon pressing the ASCII EXPORT softkey, a file name can be entered. The
default name is TRACE.DAT. Then the measured data of the trace are stored.
The function can be configured in the ASCII CONFIG submenu.
IEC/IEEE-bus command :MMEMory:STORe:TRACe 1..4,
TRACE 1 menu:
ASCII
CONFIG
ASCII
CONFIG
EDIT PATH
DECIM SEP
. ,
NEW
APPEND
HEADER
ON OFF
ASCII
COMMENT
.
.
.
The ASCII CONFIG softkey calls a submenu for various settings for
the TRACE ASCII EXPORT function.
EDIT PATH
The EDIT PATH softkey defines the directory in which the file is to be
stored.
IEC/IEEE-bus command --
DECIM SEP
. ,
The DECIM SEP softkey selects the decimal separator for the ASCII
file. The choice is ’.’ (decimal point) or ’,’ (comma).
This means that the decimal separator used in various language
versions of evaluation programs (e.g. MS-Excel) can be selected so
that the packages are supported. .
IEC/IEEE-bus command
:FORMat:DEXPort:DSEParator POINt|COMM
NEW
APPEND
The APPEND NEW softkey defines whether output data are to be
written to an existing file or a new file.
• With APPEND, the data are added to an existing file.
• With NEW, either a new file is generated or an existing file is
overwritten by storage of the data.
IEC/IEEE-bus command :FORMat:DEXPort:APPend ON | OFF
HEADER
ON OFF
The HEADER ON/OFF softkey defines whether important instrument
settings should be stored at the beginning of the file.
IEC/IEEE-bus command :FORMat:DEXPort:HEADer ON | OFF
1088.7531.12 4.237 E-15