Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

SENSe Subsystem
ESIB
:[SENSe:]FILTer:DEMPhasis:TCONstant 50US | 75US | 750US
This command sets the time constant of the de-emphasis for analog demodulation.
Example: ":FILT:DEMP:TCON 75US"
Features: *RST value: 50us
SCPI: conforming
Mode:
VA-A
:[SENSe:]FILTer:DEMPhasis:LINK DISPlay | AUDio
For analog demodulation, this command selects whether the de-emphasis set is to be active in the
audio branch only or in addition for the display of measured values.
Example: ":FILT:DEMP:LINK DISP"
Features: *RST value: AUDio
SCPI: device-specific
Mode:
VA-A
AUDio
De-emphasis effective in the audio branch only
DISPlay De-emphasis effective in the audio branch and in the display of measured values
1088.7531.12 6.132 E-15