Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

Documentation of Measurement Results
ESIB
A double-click on this symbol opens a window containing the entries of the printer queue. The relevant
print order can be cancelled by marking it with the mouse and pressing the DEL key.
While a print job is in progress, problems may occur in the printer. If, while printing, the printer issues a
PAPER OUT message, i.e., no more paper is available, the user will be prompted by the following
message
ERROR
Paper out on device LPT
(manual feed)?
ABORT
CONTINUE
to load paper into the printer. The print job will then be either continued (CONTINUE) or aborted
(ABORT).
Switchover between b/w and colored printouts is possible with the COLOR ON/OFF softkey provided
that an appropriate printer is connected. The colors of the printout correspond exactly to those on the
screen, ie a red trace will be output in red.
To change the colors of the objects on the printout, the screen colors have to be changed in DISPLAY-
CONFIG DISPLAY menu. One exception is the color of the background and the color of the diagrams.
The output background is always white irrespective of the screen color and the diagrams are always
black.
If several traces are to be output one after the other on the same sheet different colors can be chosen
for each trace with the TRC COLOR AUTO INC softkey (Trace Color Auto Increment).
On most b/w printers, a better printout of the color screen is obtained on hardcopies if the color
information is converted into gray shades. For this, the color output in menu HARDCOPY SETTINGS is
to be activated (COLOR ON).
1088.7531.12 4.50 E-15