Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

CALCulate Subsystem
ESIB
CALCulate:PEAKsearch - Subsystem
The CALCulate:PEAKsearch subsystem allows data to be processed for final measurement.
CALCulate
Command PARAMETER Unit Comment
:PEAKsearch | :PSEarch
[:IMMediate]
:MARGin
:SUBRanges
:METHod
SUBRange | PEAK
dB
--
:CALCulate:PEAKsearch|PSEarch[:IMMediate]
This command activates the generation of final measurement data.
Example: "CALC:PEAK"
Features: *RST value: -
SCPI: device-specific
Mode:
R
The numeric suffix in CALCULATE is not significant.
:CALCulate:PEAKsearch|PSEarch:MARGin MINimun .. MAXimum
This command defines the margin of the final measurement.
Example: "CALC:PEAK:MARG 5 dB"
Features: *RST value: 6 dB
SCPI: device-specific
Mode:
R
The numeric suffix in CALCULATE is not significant.
:CALCulate:PEAKsearch|PSEarch:SUBRanges 1 to 500
This command defines the number of subranges for the final measurement.
Example: "CALC:PEAK:SUBR 10"
Features: *RST value: 25
SCPI: device-specific
Mode:
R
The numeric suffix in CALCULATE is not significant.
1088.7531.12 6.56 E-15