Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

Display Configuration
ESIB
SATURATION
The SATURATION softkey is used to enter the color saturation of the
selected element.
The range is 0 to 100%.
IEC/IEEE- bus command
:DISPlay:CMAP:HSL ,,
DEFAULT
COLORS
The DEFAULT COLORS softkey restores the default settings for brightness,
color tint and color saturation for all display screen elements.
IEC/IEEE- bus command
:DISPlay:CMAP:DEFault
PREDEFINED
COLORS
The PREDEFINED COLORS softkey activates a table, to select the
predefined colors for the diplay screen elements can be selected.
IEC/IEEE- bus command :DISPlay:CMAP:PDEFined BLACk
LOGO
ON OFF
The LOGO softkey switches the Rohde & Schwarz company logo displayed in
the upper left corner of the display screen on or off.
IEC/IEEE- bus command :DISPlay:LOGO ON | OFF
FREQUENCY
ON OFF
TIME
ON OFF
The FREQUENCY softkey switches the frequency information on the screen
on and off. The softkey is available only in analyzer mode.
ON Frequency information is displayed.
OFF Frequency information is not output to the display. This can be used for
example to protect confidential data.
IEC/IEEE- bus command :DISPlay:ANNotation:FREQuency ON|OFF
The TIME softkey switches on or off the date and time display at the lower
edge of the diagram.
IEC/IEEE- bus command :DISPlay[:WINDow]:TIME ON | OFF
DISPLAY
COMMENT
SCR.SAVER
ON OFF
The DISPLAY COMMENT softkey activates the entry of a label comprising a
maximum of 50 characters. This label is displayed at the lower edge of the
diagram.
Pressing the softkey again causes the label to be switched off. The stored
text, however, is not deleted.
IEC/IEEE- bus command
:DISPlay[:WINDow]:TEXT[:DATA]
:DISPlay[:WINDow]:TEXT:STATe ON | OFF
The SCR. SAVER softkey is used to switch the energy saving mode for the
display on/off.
After the elapse of the shutdown time (SCR. SAVER TIME) the display is
completely switched off, ie including backlighting.
The screen saver is deactivated by pressing any key or by sending the
corresponding IEC/IEEE- bus command.
IEC/IEEE- bus command
:DISPlay:PSAVer[:STATe] ON | OFF
SCR.SAVER
TIME
The SCR. SAVER TIME softkey activates the entry of the time for the screen
saver to respond. The shut-down time is entered in minutes between 1 to 100
minutes.
IEC/IEEE- bus command :DISPlay:PSAVer:HOLDoff
1088.7531.12 4.8 E-15