Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

ESIB
Receiver - Traces
Content of file
File header Type;ESIB 7;
Version;2.07;
Date;01.Jan 2000;
Mode;Receiver;
Start;10000;Hz
Stop;100000;Hz
x-Axis;LIN;
Detector;AVERAGE;
Scan Count;1;
Transducer;TRD1;
Scan 1:
Start;150000;Hz
Stop;1000000;Hz
Step;4000;Hz
RBW;100000;Hz
Meas Time;0.01;s
Auto Ranging;ON;
RF Att;20;dB
Auto Preamp;OFF;
Preamp;0;dB
Input;1;
Description
Instrument model
Firmware version
Date of data set storage
Instrument mode
Start/stop of the display range.
Unit: Hz
Scaling of x-axis linear (LIN) or logarithmic (LOG)
Selected detector
MAX PEAK,MIN PEAK,RMS,AVERAGE,
QUASI PEAK,AC VIDEO
Scan count
Transducer name (if switched on)
Loop over all defined scan ranges (1-10)
Range - start frequency in Hz
Range – stop frequency in Hz
Range - step width in Hz for linear step width or in %
(1-100) for logarithmic step width
Range - resolution bandwidth
Range - measurement time
Auto ranging on - or off for current range
Range - input attenuation
Auto Preamp on or off for current range
Range - preamplifier on (20dB) or off (0dB)
Range - input (1 or 2)
Data section of the file Trace 1:
Trace Mode;AVERAGE;
x-Unit;Hz;
y-Unit;dBuV;
Values;31714;
150000.000000;11.459816;
154000.000000;13.225037;
158000.000000;12.387199;
162000.000000;13.124626;
166000.000000;13.615486;
...;...;
Selected trace
Trace mode:
CLR/WRITE,AVERAGE,MAX HOLD,MIN HOLD, VIEW,
BLANK
Unit of x values:
Unit of y values:
Number of test points
Measured values:
, ;
1088.7531.12 4.151 E-15