Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

Memory Configuration
ESIB
COPY
The COPY softkey activates the entry of the destination for the copy
operation.
By prefixing a disk drive letter (e.g. C:), a file can also be copied to another
storage medium. When the ENTER key is pressed, the selected
files/directories are copied.
IEC/IEEE-bus command
:MMEMory:COPY ’C:\user\data\setup.cfg’,’A:’
DELETE
The DELETE softkey deletes the selected files.
To prevent accidental deletion of data, confirmation by the user is requested.
IEC/IEEE-bus command
:MMEMory:DELete ’TEST01.HCP’
:MMEMory:RDIRectory ’C:\test’
RENAME
The RENAME softkey activates the entry of a new name for the selected file
or directory.
IEC/IEEE-bus command
:MMEMory:MOVE ’TEST.CFG’, ’SETUP.CFG’
MAKE
DIRECTORY
The MAKE DIRECTORY softkey creates directories/sub-directories. The use
of sub-directories is recommended as a way of structuring the storage
medium to make it easier to navigate.
When entering a subdirectory, entry of an absolute path name (e.g.;
"\USER\MEAS") as well as the path relative to the current directory (e.g.,
"..\MEAS") is possible.
IEC/IEEE-bus command :MMEMory:MDIRectory ’C:\user\data’
SORT MODE
The SORT MODE softkey activates the selection of the sort criteria for the
files listed in the FILE MANAGEMENT table.
SORT MODE
by NAME
by DATE/TIME
by EXTENSION
Directory names are at the top of the list after the entry for the next highest
directory level ("..").
IEC/IEEE-bus command --
FORMAT
DISK
The FORMAT DISK softkey formats disks located in drive A:.
To prevent accidental destruction of disks data, confirmation by the user is
requested.
IEC/IEEE-bus command :MMEMory:INITialize
1088.7531.12 4.60 E-15