Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

ESIB
Analyzer - Display and Limit Lines
DISPLAY
LINE 1
DISPLAY
LINE 2
The DISPLAY LINE 1/2 softkeys switch the display lines on/off and activate
the entry of the line location.
The display lines mark the selected levels in the measurement window.
IEC/IEEE-bus commands
:CALCulate:DLINe:STATe ON | OFF;
:CALCulate:DLINe -20dBm
THRESHOLD
LINE
The THRESHOLD LINE softkey switches the threshold line on/off and
activates the entry of the line location.
The threshold line is a display line which defines a threshold value. This
threshold value serves as a lower search limit for maximums/minimums in
the marker functions (MAX PEAK, MIN PEAK, NEXT PEAK etc.). For signal
tracking (SIGNAL TRACK function), this threshold value defines the lower
search limit (see section "Marker Functions")..
IEC/IEEE-bus commands
:CALCulate:THReshold ON | OFF;
:CALCulate:THReshold -82dBm
REFERENCE
LINE
The REFERENCE LINE softkey switches the reference line on/off and
activates the entry of the line position.
The reference line serves as the basis for mathematical correlation between
trace data (see section "Mathematical Operations on Measurement Curves"
IEC/IEEE-bus commands
:CALCulate:RLINe:STATe ON | OFF;
:CALCulate:RLINe -10dBm
FREQUENCY
LINE 1
FREQUENCY
LINE 2
The FREQUENCY LINE 1/2 softkeys switch the frequency lines 1/2 on/off
and activate the entry of the line locations.
The frequency lines mark the selected frequencies in the measurement
window or define search ranges (see section "Marker Functions").
IEC/IEEE-bus commands
:CALCulate:FLINe:STATe ON | OFF;
:CALCulate:FLINe 120 MHz
1088.7531.12 4.215 E-15