Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

Display and Limit Lines - Analyzer
ESIB
Note:
The softkeys for setting and switching the display lines on and off operate similar to a threeposition
switch:
Initial condition: The line is switched off (softkey has grey background)
1 st press: The line is switched on (softkey has red background) and data entry is
activated. The position of the display line can be adjusted by using the rollkey,
the step keys or through direct numerical inputs via the data-entry
keypad. If some other arbitrary function is requested, the data-entry keypad is
disabled. In this case, the display line remains switched on (softkey has green
background).
2 nd press: The display line is switched off (softkey has grey background).
Initial condition: The line is switched on (softkey has green background)
1 st press: The line is switched on (softkey has red background) and data entry is
activated. The position of the display line can be adjusted by using the rollkey,
the step keys or through direct numerical inputs via the data-entry
keypad. If any other arbitrary function is requested, the data-entry keypad is
disabled. In this case, the display line remains switched on (softkey has green
background).
2 nd press: The display line is switched off (softkey has grey background).
Menu LINES-D-LINES for Span ≠ 0 for Span = 0
LINES
D LINES
LIMITS
DISPLAY
LINES
DISPLAY
LINE 1
DISPLAY
LINE 2
THRESHOLD
LINE
REFERENCE
LINE
DISPLAY
LINES
DISPLAY
LINE 1
DISPLAY
LINE 2
THRESHOLD
LINE
REFERENCE
LINE
FREQUENCY
LINE 1
FREQUENCY
LINE 2
TIME
LINE 1
TIME
LINE 2
BASELINE
CLIPPING
BASELINE
CLIPPING
1088.7531.12 4.214 E-15