Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

Documentation of Measurement Results
ESIB
Entry of Comment Text
HARDCOPY SETTINGS-ENTER TEXT submenu:
ENTER
TEXT
ENTER
TEXT
COMMENT
SCREEN A
COMMENT
SCREEN B
The ENTER TEXT softkey calls the submenu for editing the
commentary for the individual windows. The comment text
appears in the print-out, but does not appear on the display
screen.
If a comment is not to appear on the printout, it has to be deleted.
By pressing PRESET, all comments will be deleted.
TITLE
COMMENT
SCREEN A
COMMENT
SCREEN B
The COMMENT SCREEN A softkey opens an entry field in which
a comment of at most two lines (60 characters per line) can be
entered for screen A or screen B. If the user enters more than 60
characters, the overflow characters appear on the second line on
the print-out. At any point, a manual line-feed can be forced by
entering the @ character. The comment is printed below the
corresponding screen.
IEC/IEEE-bus command
:HCOPy:ITEM:WINDow:TEXT
TITLE
The TITLE softkey activates a single line entry box for entering a
title for the complete print-out with a maximum of 60 characters.
IEC/IEEE-bus command
:HCOPy:ITEM:LABel:TEXT
1088.7531.12 4.54 E-15