Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

ESIB
Example - Level and Frequency Measurement
STOP
SCAN
½ Press the STOP SCAN softkey.
The measurement is aborted.
Peak and average results (see Fig.2-4 should be
further analyzed with the aid of the built-in marker
functions.
Depending on the DUT, diverse trace forms are
obtained. For this reason the diagram below should
be regarded as an example.
EMI
RECEIVER
RECEIVER
FREQUENCY
USER
ATTEN
PREAMP
ON OFF
RES BW
DETECTOR
MEAS TIME
DEMOD
SPLIT SCRN
ON OFF
DEFINE
SCAN
RUN
SCAN
Fig.2-4
Result display of standard pre-compliance measurement using
peak/average detector
1088.7531.12 2.9 E-3