Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

ESIB
Receiver - Traces
ASCII Export for Trace data
TRACE 1- menu:
ASCII
EXPORT
The ASCII EXPORT softkey stores the active trace in a file with ASCII format.
Upon pressing the ASCII EXPORT softkey, a file name can be entered. The
default name is TRACE.DAT. Then the measured data of the trace are stored.
The function can be configured in the ASCII CONFIG submenu.
IEC\IEEE bus command :MMEMory:STORe:TRACe
ASCII
CONFIG
ASCII
CONFIG
EDIT PATH
DECIM SEP
. ,
NEW
APPEND
HEADER
ON OFF
ASCII
COMMENT
.
.
.
In the ASCII CONFIG submenu, various settings for the TRACE
ASCII EXPORT function can be made.
EDIT PATH
The EDIT PATH softkey defines the directory in which the file is to
be stored.
IEC/IEEE-bus command --
DECIM SEP
. ,
The DECIM SEP softkey selects the separator for the ASCII file:
’.’ (decimal point) or ’,’ (comma).
This means that the decimal separator used in various language
versions of evaluation programs (e.g. MS-Excel) can be selected
so that the packages are supported.
IEC/IEEE-bus command
:FORMat:DEXPort:DSEParator POINt|COMMA
NEW
APPEND
The APPEND NEW softkey defines whether output data are to be
written to an existing file or a new file.
• With APPEND, the data are added to an existing file.
• With NEW, either a new file is generated or an existing file is
overwritten by storage of the data.
IEC/IEEE-bus command
:FORMat:DEXPort:APPend ON | OFF
1088.7531.12 4.149 E-15