Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

ESIB
Status Reporting System
Resetting Values of the Status Reporting System
Table 5-12 comprises the different commands and events causing the status reporting system to be
reset. None of the commands, except for *RST and SYSTem:PRESet influences the functional
instrument settings. In particular, DCL does not change the instrument settings.
Table 5-12
Resetting instrument functions
Event
Switching on supply
voltage
DCL,SDC
Power-On-Status-
Clear
(Device Clear,
Selected Device
Clear)
*RST or
SYSTem:PRESet
STATus:PRESet
*CLS
Effect 0 1
Clear STB,ESR ⎯ yes ⎯ ⎯ ⎯ yes
Clear SRE,ESE ⎯ yes ⎯ ⎯ ⎯ ⎯
Clear PPE ⎯ yes ⎯ ⎯ ⎯ ⎯
Clear EVENTt parts of the
registers
Clear Enable parts of all
OPERation and
QUEStionable registers,
Fill Enable parts of all
other registers with "1".
Fill PTRansition parts with
"1" ,
Clear NTRansition parts
⎯ yes ⎯ ⎯ ⎯ yes
⎯ yes ⎯ ⎯ yes ⎯
⎯ yes ⎯ ⎯ yes ⎯
Clear error queue yes yes ⎯ ⎯ ⎯ yes
Clear output buffer yes yes yes 1) 1) 1)
Clear command
processing and input
buffer
yes yes yes ⎯ ⎯ ⎯
1) Every command being the first in a command line, i.e., immediately following a
clears the output buffer.
1088.7531.12 5.33 E-16