Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

ESIB- Receiver
ESIB
Selection of Detectors for Final Measurement
The selection of detectors for the final measurement is made in the TRACE menu (see section
"Selection and setting of traces ").
The detectors to be used for the final measurement can be set here for each trace, ie any combination
of prescan and final measurement is possible. The required flexibility is thus obtained for the diverse
test specifications which are covered by means of the ESIB.
Traces 3 and 4 can be used for displaying the final measurement values. For this purpose, the FINAL
MEAS softkey should be activated in the associated menu. Trace 3 represents the allocated final
measurement values referring to trace 1 with the symbol "x" and trace 4 the final measurement values
for trace 2 with "+".
The results of prescan and final measurement in a diagram:
Att 0 dB AUTO
INPUT 1
100
Det
AV Trd
ResBW 120 kHz
Meas T 100 ms Unit
100 MHz
dBpT
90
80
70
1MA
2AV
60
xQP
+AV
50
40
30
014QP
014AV
20
10
0
30 MHz 300 MHz
Date: 14.DEC.1999 11:41:33
Fig. 4-8
Results of prescan and final measurement
1088.7531.12 4.108 E-15