Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

ESIB
Analyzer - Traces
Example:
Type;ESIB7;
Version;2.10;
Date;20.Sep 1999;
Comment; test
Mode;Spectrum;
Start;0.000000;Hz
Stop;3500000000.000000;Hz
Center Freq;1750000000.000000;Hz
Span;3500000000.000000;Hz
Freq Offset;0.000000;Hz
x-Axis;LIN;
y-Axis;LOG;
Level Range;100.000000;dB
Ref. Level;-20.000000;dBm
Level Offset;0.000000;dBm
Max. Level;-20.000000;dBm
RF Att;10.000000;dB
RBW;3000000.000000;Hz
VBW;3000000.000000;Hz
SWT;0.005000;s
Trace Mode;CLR/WRITE;
Detector;AUTOPEAK;
Sweep Count;0;
TRACE 1:
x-Unit;Hz;
y-Unit;dBm;
Values;500;
0.000000;-44.465958;-60.190887
7014028.056112;-49.233063;-81.451668
14028056.112224;-75.692101;-101.811501
21042084.168337;-75.147057;-101.229843
28056112.224449;-75.114517;-95.358429
35070140.280561;-71.769005;-100.755981
...
If all traces are to be stored in one file with the header information stored only once, the following
procedure is recommended:
[TRACE 1] [MENU ⇒][ASCII CONFIG]
[ASCII CONFIG] [NEW]
[ASCII CONFIG] [HEADER ON]
[TRACE 1] [MENU ⇒][ASCII EXPORT]
[TRACE 2] [MENU ⇒][ASCII CONFIG]
[ASCII CONFIG] [APPEND]
[ASCII CONFIG] [HEADER OFF]
[TRACE 2] [MENU ⇒][ASCII EXPORT]
[TRACE 3] [MENU ⇒][ASCII EXPORT]
[TRACE 4] [MENU ⇒][ASCII EXPORT]
Generate new file
with header
Store trace 1 with header
Append to end of file
without header
Write trace 2 to file
Write trace 3 to file
Write trace 4 to file
1088.7531.12 4.239 E-15