Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

ESIB
MMEMory Subsystem
:MMEMory:SELect[:ITEM]:MACRos ON | OFF
This command includes the keyboard macros in the list of data subsets of a device setting to be
stored/loaded.
Example: ":MMEM:SEL:MACRos ON"
Features: *RST value: OFF
SCPI: device-specific
Modes:
R, A, VA
:MMEMory:SELect[:ITEM]:SCData ON | OFF
This command includes the tracking generator calibration data in the list of data subsets of a device
setting to be stored/loaded.
Example: ":MMEM:SEL:SCData ON"
Features: *RST value: OFF
SCPI: device-specific
Modes:
R, A, VA
This command only available in conjunction with the option Tracking Generator.
:MMEMory:SELect[:ITEM]:TRANsducer[:ACTive] ON | OFF
This command includes the active transducer factors and set in the list of data subsets of a device
setting to be stored/loaded.
Example: ":MMEM:SEL:TRAN ON"
Features: *RST value: ON
SCPI: device-specific
Modes:
R, A, VA
Upon MMEM:LOAD the transducer factors and sets which are not currently active but contained in the
data set are restored as well.
:MMEMory:SELect[:ITEM]:TRANsducer:ALL ON | OFF
This command includes all transducer factors and sets in the list of data subsets of a device setting
to be stored/loaded.
Example: ":MMEM:SEL:TRAN:ALL ON"
Features: *RST value: ON
SCPI: device-specific
Modes:
R, A, VA
This command is an event and therefore has no *RST value assigned.
1088.7531.12 6.97 E-15