Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

ESIB
Options
Installation and Configuration of the Driver for the Network Adapter
½ Select "Adapter".
½ Click "Add" and mark network driver "SMC
8416 EtherEZ" and select with "OK".
The query "Files.." is displayed.
½ Answer it by clicking "Continue".
The "SMCEthernet Card Setup" window is
displayed.
½ Close the window with "OK".
Some files are copied and the network
adapter is displayed under "Network
Adapters".
The entry "MS Loopback Adapter" refers
to a driver which ensures instrument
control and should not be modified.
Note: The network adapter settings must
not be modified since this may cause
problems to the instrument.
Installation of Network Protocols
Note: The network administrator knows which protocols are to be used..
½ Select "Protocol".
½ Click "Add", mark the desired protocol and
select with "OK".
This operation has to be performed
several times when several protocols are
selected.
½ Execute the installation by clicking
"Continue".
Note: If a protocol requires further settings,
they can be performed with "Properties"
after marking the corresponding
entry. If further settings are not
possible, this field is gray.
1088.7531.12 1.45 E-3