Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

ESIB
CALCulate Subsystem
:CALCulate:MARKer:FUNCtion:SUMMary:AOFF
This command switches off all measuring functions.
Example: ":CALC:MARK:FUNC:SUMM:AOFF"
Features: *RST value: _
SCPI: device-specific
Modes:
A-Z, VA
This command is an "event" and therefore has no *RST value assigned and no query.
:CALCulate:MARKer:FUNCtion:CENTer
This command sets the center or receiver to that of the current marker.
Example: ":CALC:MARK:FUNC:CENT"
Features: *RST value: -
SCPI: device-specific
Modes:
R, A-F
This command is an "event" and therefore has no *RST value assigned and no query.
:CALCulate:MARKer:FUNCtion:CSTep
This command sets the step width of the center frequency to the x-value of the current marker.
Example: ":CALC:MARK:FUNC:CST"
Features: *RST value: -
SCPI: device-specific
Modes:
R, A-F
This command is an "event" and therefore has no *RST value assigned and no query.
:CALCulate:MARKer:FUNCtion:STARt
This command sets the start frequency to the frequency of the current marker.
Example: ":CALC:MARK:FUNC:STAR"
Features: *RST value: -
SCPI: device-specific
Modes:
R, A-F
This command is an "event" which is why it is not assigned an *RST value and has no query.
:CALCulate:MARKer:FUNCtion:STOP
This command sets the stop frequency to the frequency of the current marker.
Example: ":CALC:MARK:FUNC:STOP"
Features: *RST value: -
SCPI: device-specific
Modes:
R, A-F
This command is an "event" which is why it is not assigned an *RST value and has no query.
1088.7531.12 6.53 E-15