Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

Search Functions - Analyzer
ESIB
ACTIVE
MKR DELTA
The ACTIVE MKR / DELTA softkey toggles between the active marker and
the active delta marker.
If DELTA is illuminated, the following search functions are performed with the
active delta marker.
Note:
Switching between marker and delta marker entry modes may
also be performed using the NORMAL and DELTA keys.
IEC/IEEE-bus command --
SELECT
MARKER
The SELECT MARKER softkey activates the selection of the marker/delta
markers. The selection box lists the currently enabled markers/delta markers.
MARKER SELECT
MARKER 1
MARKER 3
MARKER 4
DELTA SELECT
DELTA 1
DELTA 2
DELTA 3
IEC/IEEE-bus command --
PEAK
The PEAK softkey sets the active marker/delta marker to the maximum
displayed value on the corresponding trace.
IEC/IEEE-bus commands
:CALCulate:MARKer:MAXimum
:CALCulate:DELTamarker:MAXimum
NEXT PEAK
The NEXT PEAK softkey sets the active marker/delta marker to the trace
value next in magnitude after the peak.
IEC/IEEE-bus commands
:CALCulate:MARKer:MAX:NEXT
:CALCulate:DELTamarker:MAX:NEXT
NEXT PEAK
The NEXT PEAK RIGHT softkey sets the active marker to the next peak to
the right of the current marker position.
IEC/IEEE-bus commands
:CALCulate:MARKer:MAX:RIGHt
:CALCulate:DELTamarker:MAX:RIGHt
NEXT PEAK
RIGHT
The NEXT PEAK LEFT softkey sets the active marker to the next peak to the
left of the current marker position.
IEC/IEEE-bus commands
:CALCulate:MARKer:MAX:LEFT
:CALCulate:DELTamarker:MAX:LEFT
MIN
The MIN softkey sets the active marker to minimum displayed value on the
corresponding trace.
IEC/IEEE-bus commands
:CALCulate:MARKer:MIN
:CALCulate:DELTamarker:MIN
1088.7531.12 4.204 E-15