Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

ESIB
Installing Windows NT Software
Firmware Update
The installation of a new firmware version can be performed using the built-in diskette drive and does
not require opening the receiver. The firmware update kit contains several diskettes.
The installation program is called up in the CONFIGURATION - SETUP menu.
Insert diskette 1 into the drive.
CONFIGURATION
MODE
SETUP
Call SETUP-GENERAL SETUP menu
½ Press the SETUP key in the CONFIGURATION
field.
The SETUP menu is opened.
MENU
½ Change to the right-hand menu using the menu key.
FIRMWARE
UPDATE
½ Press the FIRMWARE UPDATE softkey.
The submenu is opened.
UPDATE
½ Press the UPDATE softkey.
The installation program starts and leads the user
through the remaining steps of the update.
The installation can be cancelled.
RESTORE
½ Press the RESTORE softkey.
The previous firmware version is restored.
1088.7531.12 1.37 E-3