Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

ESIB
DISPlay Subsystem
:DISPlay:LOGO ON | OFF
This command switches the factory logo on the screen on or off.
Example: ":DISP:LOGO OFF"
Features: *RST value: ON
SCPI: device-specific
Modes:
R, A, VA
:DISPlay:CMAP:DEFault
This command resets the screen colors of the instrument to their default settings.
Example: ":DISP:CMAP:DEF"
Features: *RST value: --
SCPI: conforming
Modes:
R, A, VA
This command is an event and has thus no query and no *RST value assigned. The numeric suffix in
CMAP is not significant.
:DISPlay:CMAP:HSL ,,
This command defines the color table of the instrument.
Parameter: hue = TINT
sat = SATURATION
lum = BRIGHTNESS
The value range is 0.0 to 100.0 for all parameters.
Example: ":DISP:CMAP2:HSL 0.3,0.8,1.0"
Features: *RST value: --
SCPI: conforming
Modes:
R, A, VA
To each numeric suffix of CMAP is assigned one or several picture elements which can be modified
by varying the corresponding color setting. The following assignment applies:
CMAP1 Trace 1 CMAP8 Soft key State Data Entry
CMAP2 Trace 2 CMAP9 Soft key State OFF
CMAP3 Trace 3 CMAP10 Soft key Shade
CMAP4 Trace 4 CMAP11 Text
CMAP5 Marker CMAP12 Title
CMAP6 Grid CMAP13 Background
CMAP7 softkey State On
The values set are not changed by *RST.
1088.7531.12 6.65 E-15