Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

ESIB- Receiver
ESIB
Editing a Scan
The parameters of a scan subrange in a scan data record can be modified or complete subranges can
be added or deleted. When changing the scan limit frequencies, care should be taken that the scan
ranges do not overlap.
Complete scan ranges can be cleared or added with the INSERT RANGE and DELETE RANGE
softkeys.
Predefined settings of standard-conformal frequency ranges and associated receiver settings can be
selected (softkeys CISPR RANGE A...D).
CONFIGURATION MODE - EMI RECEIVER - DEFINE SCAN menu
INS BEFORE
RANGE
The INS BEFORE RANGE softkey shifts the active scan range
in the table to the left by one column. A new column with
identical settings is created. The limit frequencies can be
changed accordingly.
IEC/IEEE-bus command --
INS AFTER
RANGE
The INS AFTER RANGE softkey shifts the active scan range in
the table to the right by one column. A new column with identical
settings is created. The limit frequencies can be changed
accordingly.
IEC/IEEE-bus command --
DELETE
RANGE
The DELETE RANGE softkey clears the activated scan range.
All other ranges are shifted to the left by one column.
IEC/IEEE-bus command --
RANGES
1-5 6-10
With the RANGES 1-5/6-10 softkey a switchover can be made
between ranges 1-5 and 6-10.
IEC/IEEE-bus command --
1088.7531.12 4.94 E-15