Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

ESIB
Mode Selection
Mode Selection – MODE Key
The ESIB can be operated in one of several modes, each of which is different with respect to
functionality and control. The differences in control, however, consist not only in the enabling/disabling of
additional softkeys within existing softkey menus, but rather in the fact that existing menus are
completely replaced by new menus and menu trees which are tailored to the functional requirements.
CONFIGURATION MODE menu
CONFIGURATION
MODE
SE P
MODE
ANALYZER
EMI
RECEIVER
TRACKING
GENERATOR
VECTOR
ANALYZER
.
.
The MODE key opens the menu for selection
of the mode.
Herein, the modes can be selected according
to the available ESIB options.
• Analyzer
• EMI Test Receiver
• Tracking Generator
• Vector Signal Analysis and
ANALYZER
The ANALYZER softkey selects the ANALYZER mode.
The functions provided correspond to those of a conventional spectrum
analyzer. The analyzer measures the frequency spectrum of the test signal
over the selected frequency range with the selected resolution and sweep
time, or, for a fixed frequency, displays the waveform of the video signal.
IEC/IEEE-bus command :INSTrument[:SELect] SANalyzer
EMI
RECEIVER
The EMI RECEIVER softkey selects the EMI Test Receiver mode.
This mode is the default setting of the ESIB.
In the receiver mode, ESIB behaves like a test receiver, ie if the basic
settings are active, it measures the level with the selected bandwidth and
measurement time at the set frequency. The signal is evaluated by means of
the four detectors average, peak, rms and quasi peak.
A frequency sweep may be carried out with the start and stop frequencies
and the stepwidth.
The main menu of the RECEIVER mode is described in detail in Section ’EMI
Receiver Mode’.
IEC/IEEE-bus command :INSTrument[:SELect] RECeiver
TRACKING
GENERATOR
The TRACKING GENERATOR softkey selects the operating mode Scalar
Network Analysis.
The softkey is only available if ESIB is equipped with option: FSE-B10 or B11.
For a detailed description of operation see Section ’Option Tracking
Generator’.
1088.7531.12 4.19 E-15