Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

MMEMory Subsystem
ESIB
:MMEMory:SELect[:ITEM]:TRACe ON | OFF
This command includes the data of the selected trace in the list of data subsets of a device setting to
be stored/loaded.
Example: ":MMEM:SEL:TRACE3 ON"
Features: *RST value: OFF for all Traces
SCPI: device-specific
Modes:
R, A, VA
:MMEMory:SELect[:ITEM]:LINes[:ACTive] ON | OFF
This command includes the active limit lines in the list of data subsets of a device setting to be
stored/loaded.
Example: ":MMEM:SEL:LIN ON"
Features: *RST value: ON
SCPI: device-specific
Modes:
R, A, VA
Upon MMEM:LOAD the limit lines which are not currently active but contained in the data set are
restored as well.
:MMEMory:SELect[:ITEM]:LINes:ALL ON | OFF
This command includes all limit lines in the list of data subsets of a device setting to be
stored/loaded.
Example: ":MMEM:SEL:LIN:ALL ON"
Features: *RST value: ON
SCPI: device-specific
Modes:
R, A, VA
This command includes selection of the active limit lines.
:MMEMory:SELect[:ITEM]:CSETup ON | OFF
This command includes the current color setting in the list of partial datasets of a device setting to be
stored/loaded.
Example: ":MMEM:SEL:CSET ON"
Features: *RST value: ON
SCPI: device-specific
Modes:
R, A, VA
:MMEMory:SELect[:ITEM]:HCOPy ON | OFF
This command includes the hardcopy settings in the list of data subsets of a device setting to be
stored/loaded.
Example: ":MMEM:SEL:HCOPy ON"
Features: *RST value: ON
SCPI: device-specific
Modes:
R, A, VA
1088.7531.12 6.96 E-15