Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

ESIB
STATus Subsystem
COMMAND PARAMETERS UNIT COMMENT
STATus
:QUEStionable
:FREQuency
[:EVENt]?
:CONDition?
:ENABle
:PTRansition
:NTRansition
:TRANsducer
[:EVENt]?
:CONDition?
:ENABle
:PTRansition
:NTRansition
:QUEue?
[:NEXT]?
--
--
0 to 65535
0 to 65535
0 to 65535
--
--
--
--
0 to 65535
0 to 65535
0 to 65535
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
:STATus:OPERation[:EVENt]?
This command queries the contents of the EVENt section of the :STATus:OPERation register.
Example: ":STAT:OPER?"
Features: *RST value: –
SCPI: conforming
Modes:
R, A, VA
The contents of the EVENt section is deleted with readout.
:STATus:OPERation:CONDition?
This command queries the CONDition section of the :STATus:OPERation register.
Example: ":STAT:OPER:COND?"
Features: *RST value: –
SCPI: conforming
Modes:
R, A, VA
Readout does not delete the contents of the CONDition section. The value returned reflects the
current hardware status.
:STATus:OPERation:ENABle 0 to 65535
This command sets the bits of the ENABle section of the :STATus:QUEStionable register.
Example: ":STAT:OPER:ENAB 65535"
Features: *RST value: –
SCPI: conforming
Modes:
R, A, VA
The ENABle register selectively enables the individual events of the associated EVENt section for the
sum bit in the status byte.
1088.7531.12 6.157 E-15