Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

ESIB
SENSe Subsystem
:[SENSe:]FREQuency:SPAN:LINK CENTer | START | STOP
This command defines the coupling for frequency-span changes.
Example: ":FREQ:SPAN:LINK STOP"
Features: *RST value: CENTer
SCPI: conforming
Mode:
A
:[SENSe:]FREQuency:STARt 0 GHz to f max
This command defines the start frequency of the scan in receiver mode or the start frequency of the
analyzer.
Example: ":FREQ:STAR 20MHz"
Features: *RST value: 0
SCPI: conforming
Modes:
R, A
In analyzer mode, the automatic coupling of the parameters is set to STOP FIXED.
:[SENSe:]FREQuency:STARt:LINK CENTer | STOP | SPAN
This command defines the coupling for start-frequency changes.
Example: ":FREQ:STAR:LINK SPAN"
Features: *RST value: STOP
SCPI: device-specific
Mode:
A
:[SENSe:]FREQuency:STOP 0 GHz to f max
This command defines the stop frequency of the scan in receiver mode or the stop frequency of the
analyzer.
Example: ":FREQ:STOP 2000MHz"
Features: *RST value: f max
SCPI: conforming
Modes:
R, A
In analyzer mode, the automatic coupling of the parameters is set to STARt FIXED.
:[SENSe:]FREQuency:STOP:LINK CENTer | STARt | SPAN
This command defines the coupling for stop-frequency changes.
Example: ":FREQ:STOP:LINK SPAN"
Features: *RST value: STARt
SCPI: device-specific
Mode:
A
1088.7531.12 6.135 E-15