Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

Saving Data Sets
ESIB
Selecting the Data Set for Saving
MEMORY SAVE menu:
EDIT
NAME
The EDIT NAME softkey activates the entry of the name of the data set to be
saved.
Data entry is concluded by pressing one of the units keys which initiates a
save operation to store the data set.
IEC/IEEE-bus command
:MMEMory:STORe:STATe 1,’test’
EDIT
PATH
The EDIT PATH softkey activates the input of a directory name where the
data sets are to be stored. Default path is c:\user\config.
IEC/IEEE-bus command --
EDIT
COMMENT
The EDIT COMMENT softkey activates the entry of comments for the current
data set. A total of 60 characters are available for this purpose.
IEC/IEEE-bus command
:MMEMory:COMMent
DATA SET
LIST
The DATA SET LIST softkey opens the DATA SET LIST/CONTENTS table.
The DATA SET CLEAR and DATA SET CLEAR ALL softkeys are also
displayed.
The DATA SET LIST column lists all the data sets which are stored in the
selected directory.
The CONTENTS and COMMENT lines in the DATA SET CONTENTS
column indicate the saved data subsets and the comments for the currently
selected data set.
IEC/IEEE-bus command --
Note:
The current instrument configuration can be easily stored under the
name of an existing data set:
½ Press a units key after selecting a data set
The name and the selection of the data subsets for the currently
selected data set will be placed in the SAVE DATA SET table. The
DATA SET LIST table is closed and, instead, the entry field for the
EDIT NAME function with the name of the selected data set is
opened.
½ Press a units key.
The current instrument configuration is saved as a data set under
this name.
1088.7531.12 4.62 E-15