Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

Level Display/RF Input - Receiver
ESIB
dB µ V
dBm
dB µ A
The dBµV, dBm, dBµA, dBpW, dBpT, dBµV/m, dBµA/m, dB*/MHz softkeys
set the display units to the corresponding logarithmic units.
The dBµV unit is the default unit in receiver mode.
IEC/IEEE bus command
:CALCulate:UNIT:POWer
DBMV | DBM | DBUA | DBPW | DBPT |
DBUV_M | DBUA_M | DBUV_MHZ |
DBUA_MHZ | DBMV_MHZ
dBpW
dBpT µ
dB µ V/m
dB µ A/m
dB*/MHz
PROBE CODE
ON / OFF
The PROBE CODE ON/OFF softkey enables or disables the units defined by
the coded connector.
IEC/IEEE bus command :UNIT:PROBe ON | OFF
1088.7531.12 4.114 E-15