Operating Manual EMI TEST RECEIVER ESIB7 - Rohde & Schwarz

SENSe Subsystem
ESIB
:[SENSe:]MIXer:PORTs 2 | 3
This command activates the 2- or 3-port mixer. In the BAND LOCK ON mode, the command refers
to the active band selected with SENSe:MIXer:HARMonic:BAND .
Example: ":MIX:PORT 3"
Features: *RST value: 2
SCPI: device-specific
Mode:
A
This command is available only if the external mixer (option FSE-B21) is switched on.
:[SENSe:]MIXer:SIGNal ON | OFF | AUTO
This command activates the Signal ID or Auto ID mode.
Example: ":MIX:SIGN ON"
Features: *RST value: OFF
SCPI: device-specific
Mode:
A
This command is available only if the external mixer (option FSE-B21) is switched on.
:[SENSe:]MIXer:THReshold 0.1 to 100 dB
This command sets the level threshold for auto ID.
Example: ":MIX:THR 20"
Features: *RST value: 10
SCPI: device-specific
Mode:
A
The command is available only if the external mixer (option FSE-B21) is switched on.
:[SENSe:]MIXer:HARMonic 1 to 62
With BAND LOCK OFF, this command sets the nth harmonic. The command may be a query with
BAND LOCK ON.
Example: ":MIX:HARM 5"
Features: *RST value: 2
SCPI: conforming
Mode:
A
The command is available only if the external mixer (option FSE-B21) is switched on.
:[SENSe:]MIXer:HARMonic:TYPE ODD | EVEN | EODD
With BAND LOCK ON, this command sets the type of harmonic.
Example: ":MIX:HARM:TYPE EODD"
Features: *RST value: EVEN
SCPI: device-specific
Mode:
A
The command is available only if the external mixer (option FSE-B21) is switched on.
1088.7531.12 6.138 E-15